Remote Control Programming; Programming By Predefined Tv Brand Codes; Setup By Manual Search In The Tv Code Library; To Identify The Tv Brand Code Programmed - Tele System All in One 58040107 Quick Manual

ALL.IN.ONE

5 5 5 5 Remote control programming

Remote control programming Remote control programming Remote control programming

5.1 Programming by predefined TV brand codes

5.1 5.1 5.1 Programming by predefined TV brand codes Programming by predefined TV brand codes Programming by predefined TV brand codes
The default TV brand codes are listed at the end of this user manual. Detect the brand of
your TV set, then follow these steps:
1. Make sure your TV device is switched on (not in stand-by).
2. Press and release the TV
3. Simultaneously press and hold both the POWER
seconds until TV LED TV LED indicator will be stay on. Release then the POWER
TV LED TV LED
buttons.
4. Enter the 4-digit TV/STB brand code (from the lists) by using the numeric buttons 0÷9.
5. The TV LED TV LED TV LED will turn off if the remote control accepts the code after the four digits. TV LED
CAUTION CAUTION
CAUTION CAUTION
If the code is wrong, the LED will flash 3 times and turn off; in this last case, repeat the
procedure.
6. Check the functions of the buttons of the remote control. If it does not function
correctly, try another 4-digit TV set code from the list under the same brand by
repeating the steps from 1 to 5 until all basic functions operate correctly.
If the TV brand is not present in the list or the setup is unsuccessful, try the next method.
5.2 5.2 Setup by manual search 5.2 5.2 Setup by manual search

Setup by manual search in the TV code library

Setup by manual search
1. Make sure your TV device is switched on (not in stand-by).
2. Press and release the TV
3. Simultaneously press and hold both the POWER
seconds until TV LED TV LED indicator will be stay on. Release then the buttons.
TV LED TV LED
4. Point the remote control at the television to be controlled and press PROG+
POWER) once. After a few of seconds the remote starts stepping through the code POWER
POWER POWER
library (fast search, 1 code for second).
5. You can press PROG+
search, 1 code any 3 seconds).
6. You can press PROG PROG+ + + + (or POWER
PROG PROG
7. If your code is accidentally passed, then press PROG
8. As soon as the TV set responds to the command, by going in stand-by or changing
channel, press the OK
9. Check whether the other buttons of the remote control function properly. If the
majority of the buttons does not function correctly, repeat the procedure starting from
the first step.
5.3 To identi 5.3 5.3 5.3 To identif f f f y y y y the TV brand code To identi To identi the TV brand code programmed the TV brand code the TV brand code
To identify the TV brand code in use by the remote control, follow these steps:
1. Press and release the TV
2. Simultaneously press and hold both the POWER
seconds until TV LED TV LED indicator will be stay on. Release then the POWER
TV LED TV LED
buttons.
3. Press shortly POWER POWER and MUTE
POWER POWER
4
TV button.
TV TV
in the TV code library in the TV code library in the TV code library
TV button.
TV TV
PROG+ (or POWER POWER) a second time to switch to slow search (slow
PROG+ PROG+ POWER POWER
POWER) repetitively to carry out a manual search.
POWER POWER
OK button to save the code. The TV LED
OK OK
TV button. TV TV
MUTE together and the TV LED
MUTE MUTE
POWER and MUTE
POWER POWER
POWER and MUTE POWER POWER
PROG- - - - to backtrack through the library.
PROG PROG
TV LED will turn OFF.
TV LED TV LED
programmed programmed programmed
POWER and MUTE
POWER POWER
TV LED flashes three times.
TV LED TV LED
MUTE buttons for approx. 3
MUTE MUTE
POWER and MUTE
POWER POWER
MUTE buttons for approx. 3 MUTE MUTE
PROG+ (or
PROG+
MUTE buttons for approx. 3
MUTE MUTE
POWER and MUTE
POWER POWER
MUTE
MUTE MUTE
PROG+
MUTE
MUTE MUTE