Problem Solving - Tele System All in One 58040107 Quick Manual

ALL.IN.ONE

7 7 7 7 Problem solving

Problem solving Problem solving Problem solving
PROBLEM PROBLEM
PROBLEM PROBLEM
The remote control
does not work.
Some buttons do not
work
CAUTION CAUTION
CAUTION CAUTION
Because of the large number of TV equipment available in the market, it is not possible to
guarantee the compatibility with all devices.
8
POSSIBLE CAUSE POSSIBLE CAUSE
POSSIBLE CAUSE POSSIBLE CAUSE
(1) The appliance is in Stand-by.
(2) The remote control is not being
directed towards the receiver.
(3) The remote control batteries
are flat.
(4) The batteries
inserted in the wrong direction.
(5) The remote control has been
dropped and
components have been damaged.
(6) Wrong remote control mode in
use.
(1) Buttons are
programmed.
(2) Buttons has been programmed
by learning function and later an
TV or STB code has been set.
REMEDY REMEDY
REMEDY REMEDY
(1) Press the STAND-BY
button on the appliance to
check
working properly.
(2) Make sure nothing is
have been obstructing the front panel.
(3) Change batteries.
(4)
its internal polarities.
(5) Contact the local dealer
and buy a new remote
control.
(6) Press STB or TV button
and check the response of
the box.
not pre- (1) Program the buttons by
using the learning function
or map recall
(2) Perform a reset of the TV
and/or STB auto learnt keys
(ref. 5.5 and/or 6.5)
if the device
Check the battery
is