Batteries; Basic Info; How To Use The Remote Control - Tele System All in One 58040107 Quick Manual

2 2 2 2 Batteries

Batteries Batteries Batteries
To insert the batteries at the first usage of remote unit.
This remote uniti s compliant with standard batteries 2
x AAA, 1.5V.
To avoid to damage the remote unit please remove the
batteries when it is not used for a long period of time. To
avoid to use different types of batteries or discharged
and charged batteries at the moment.
To insert the batteries as showed in the picture. To
remove the batteries when the remote unit does not
work properly repeating similar operations of insertion.
The exhausted batteries must be taken to an authorised
collection point.
NOTE NOTE NOTE NOTE
Because of mistakes or updates aimed at continuous improvement of the product, some
features described in this manual may not match the product inside the packaging.

3 3 3 3 Basic info

Basic info
Basic info Basic info
After completing the programming process of the universal remote All.in.one, you can
operate a maximum of 2 different devices: TV and decoder (or, in lieu of one of the two and
using the learning function, a DVD / HDD / recorder or VCR).
After having properly programmed the remote control unit for controlling the STB or TV
set, it will work like the original remote control of the TV set, limited to main functions,
such as On/Standby switching, audio volume adjustment and channel change.
NOTE NOTE NOTE NOTE
In the following chapter we use the acronym STB that means Set Top Box to indicate the
receiver equipment.
4 4 4 4 H H H H ow to use the remote control ow to use the remote control
ow to use the remote control ow to use the remote control
Press the proper function button STB
equipment, then point the remote control at the IR sensor of the target device. At each IR
transmission, the TV TV LED
TV TV
STB STB or TV STB TV TV TV to control respectively the receiver or the TV
LED or STB LED STB LED indicators will blink.
LED LED STB LED STB LED
1. TV TV TV TV
2. TV LED TV LED
TV LED TV LED
3. STB STB
STB STB
4. STB LED STB LED
STB LED STB LED
press and release the button TV to enter in the
TV control mode.
Led marker used during the TV mode setup
press and release the button STB to enter in
the STB control mode.
Led marker used during the STB mode setup
TELE System
3