Disassembly / Reassembly; Preliminary Operations; Replacing The Screen (3) - SAMES KREMLIN Airspray User Manual

Maintenance
8.5

Disassembly / Reassembly

Preliminary operations

8.5.1

Replacing the screen (3)

582216110-Filter-EN-indA
ATTENTION
Before any intervention, it is imperative to follow the
and the safety
 Remove air cap from the spray gun and put it into solvent.
 Remove suction rod from the material container and inmerse it in
a solvent filled container. Take all the appropriate precautions in
the presence of flammable solvents.
 Point the spray gun towards the material container and press the
gun trigger. When the solvent flows out, point the spray gun into
a recovery container.
 When the solvent flows out clear and clean, release the gun
Time required
instructions.
1 minute 50
 Unscrew the nut (1) manually,
 Manually remove the bowl (2),
 Manually remove the screen (3),
 Clean or replace the screen (3),
 Replace the seal (5).
decompression procedure
28