Table of Contents
Advertisement
Safety instructions
Pressure hazards
Toxic chemicals hazards
582216110-Filter-EN-indA
Safety requires that a pressure relief air shut-off valve be installed in the
air stage supply circuit to release trapped air when the supply is shut
off.
Also, a fluid drain valve must be installed in the fluid system so that the
fluid can be drained (after shutting off motor air and decompressing it)
before any intervention on the equipment. These valves must remain
closed for air and open for the product during the intervention.
Toxic materials or vapors can cause serious injury through contact with
the body, in the eyes, under the skin, but also by ingestion or inhalation.
It is imperative :
to know the type of material used and the dangers it
represents,
to store the materials to be used in appropriate areas,
to contain the material used during the application in a
container designed for this purpose,
to dispose the materials in accordance with the legislation
of the country where the equipment is used,
to wear clothing and protection designed for this
purpose,
to wear goggles, hearing, gloves, shoes, coveralls and
respiratory masks.
The use of halogenated hydrocarbon solvents and
products containing these solvents in the presence of
aluminum or zinc is prohibited.
Failure to follow these instructions could result in an
explosion hazard causing serious injury or death.
ATTENTION
10
Advertisement
Table of Contents
