Table of Contents
Advertisement
7 Diagnostic help / Troubleshooting guide
Troubleshooting
7.1
Possible symptoms of faults / Causes of faults / Remedies to
apply - fast operation
582216110-Filter-EN-indA
Before any intervention on a filter, it is imperative to carry out a general
procedure of decompression and drain.
Lock the guns (valve, tap, etc.) to OFF.
Turn off the air supply through the valve on the plate.
Unlock the gun (valve, tap ...).
Bring the gun (valve, tap ...) to a metal bucket to collect
the fluid. Hold it against the wall of this bucket to avoid
interrupting the continuity of the earthing (use the wire
with stirrup to put the metal bucket to earth).
Open the gun (valve, tap) to drain the network.
Lock the gun (valve, tap) to OFF.
Check the conformity of the wiring before intervention.
Purge the filter before replacing components.
WARNING
Before any intervention, it is imperative to follow the
procedure
and the
safety
Depressurize the fluid network by opening the drain valve
of the pump or of the gun.
For the filter to work properly, it is necessary to clean the filter element
regularly to avoid clogging.
Diagnostic help / Troubleshooting guide
instructions.
decompression
25
Advertisement
Table of Contents
