Table of Contents
Advertisement
Safety instructions
Environment
Material markings
582216110-Filter-EN-indA
To avoid risks due to static electricity, the equipment and its
components must be grounded.
Have the ground continuity checked by a qualified
electrician. If ground continuity is not assured, check
terminal, wire and grounding point. Never operate the
equipment without first resolving this problem.
The gun must be 'grounded' through the air hose or fluid
hose.
The equipments to be painted must also be "grounded"
by means of clamps fitted with cables or, if suspended,
by means of hooks which must be kept clean
permanently.
Note: all objects in the work area must also be grounded.
Do not store more flammable materials than necessary
inside the work area.
These materials must be stored in approved, grounded
containers.
Use only grounded metal pails for flushing solvents.
Cardboard and papers are to be banned. They are very
bad conductors, even insulators.
Each appliance is fitted with a nameplate bearing the name of the
manufacturer,
the
information for the use of the appliance (pressure, power, etc.) and
sometimes the pictogram shown opposite.
The equipment is designed and manufactured with high quality
materials and components that can be recycled and reused.
The 2012/19/EU European Directive applies to all devices marked
with this logo (crossed-out waste bin). Find out more about the
collection
systems
appliances.
Follow the rules in your locality and do not dispose of your old
appliances with your household waste. Proper disposal of this old
appliance will help prevent negative effects on the environment
and human health.
appliance
reference
available
for
electrical
number,
important
and
electronic
14
Advertisement
Table of Contents
