5.3
Recommendation materials
5.4
Storage
5.5
Handling
582216110-Filter-EN-indA
WARNING
Trained personnel with PPE mandatory.
Do not use the filter as a support for the pipework system.
When moving the filter, make sure that it cannot fall down.
Never move the filter by pulling on the hoses: risk of
damaging the pump and/or the hoses.
Ensure that the system components are properly
supported to prevent an overload on the filter parts.
Ensure that regulations relating to the protective earthing
system are observed.
No electrical connection is required, apart from the earth
grounding. The pump is self-priming.
Place the equipment away from moisture after closing the various air
inlets and various openings (plugs).
The filter should only be stored in a safe place if it has been
thoroughly cleaned beforehand.
Extreme storage conditions accelerate the ageing
process.
We recommend a storage temperature between +10°C /
50°F and +25°C / 77°F.
Exclude the effect of ozone or ionising radiation.
No slinging foreseen for the filter due to its weight (690 g / 24.3 oz). The
filter must therefore be handled by hand.
Installation
21