Resetting your HP iPAQ
You might need to perform a soft reset if your HP iPAQ stops responding. The two
types of resets are soft and clean.
Performing a Soft Reset
A soft reset stops all running applications, but does not erase any programs or
saved data.
NOTE Be sure to close all running applications before performing a soft reset.
To perform a soft reset:
1. Locate the recessed Reset button on the bottom of your HP iPAQ.
2. Use the stylus to lightly press the Reset button.
The HP iPAQ restarts and displays the Today screen.
Performing a Clean Reset
A clean reset clears all user-installed settings, programs, and data, and restores
your HP iPAQ to factory settings.
To perform a clean reset and return your HP iPAQ to factory settings:
1. Press and hold the Answer/Send, Power, and End Call buttons.
2. While holding these buttons, use the stylus to lightly press the Reset button
on the bottom of the HP iPAQ until the device restarts.
3. When the HP iPAQ restarts, release all of the buttons, and then remove the
stylus from the Reset button.
The HP iPAQ restarts and powers on.
15