Setting Up An E-Mail Account On An Exchange Server - HP iPAQ hw6900 Product Information Manual

NOTE Some of the messaging applications may vary and are available only in
select HP iPAQ models.
Synchronizing with a Server via GSM/GPRS/EDGE
The HP iPAQ offers you a comprehensive set of wireless capabilities to keep you
connected in or out of the office.
With Global System for Mobile Communications/General Packet Radio Service/
Enhanced Data Rates for Global Evolution (GSM/GPRS/EDGE), and Bluetooth
integrated into a single HP iPAQ, you have broad coverage offering high-speed
access to the Internet, and to business and personal information.
You can obtain a wireless GSM/GPRS/EDGE connection to make a phone call or
send or receive e-mail, text message, or Multimedia Messaging Service
(MMS) messages.
You must have an account with a mobile telephone service provider that supports
GSM/GPRS/EDGE data services and an activated SIM card. The service provider
must enable the GPRS data features on your account to activate it and must have
EDGE technology on the network for this capability to be used on the HP iPAQ. If
EDGE is not enabled, the
HP iPAQ defaults to GPRS.
Your HP iPAQ phone has an automatic band-switching function that allows you to
use your phone outside of your home country if a GSM network is present. This
feature is built-in so there is no user setup or action required. However, your service
plan must support international roaming. To verify that your service plan supports
international roaming, contact your mobile phone service provider.
To learn more about GSM/GPRS/EDGE and how to manually configure your
connection, refer to Additional Product Information located on the Getting
Started CD.

Setting up an E-mail Account on an Exchange Server

You can synchronize directly with Exchange Server using a connection to a
wireless network or a personal computer.
To set up e-mail on an Exchange server:
1. Tap Start > Programs > ActiveSync.
31