Changing The Type Of Activesync Connection - HP iPAQ 510 Product Manual

Hp ipaq 510: user guide
Hide thumbs Also See for iPAQ 510:
Table of Contents

Advertisement

Install applications on your HP iPAQ
Synchronize links
Send and receive e-mail
Request meetings
Synchronizing your HP iPAQ with your computer allows you to keep the same information (such as
calendar, contacts, and e-mail messages) on both units, making it available when you work on your
computer or when you take your HP iPAQ on the go. You can synchronize your HP iPAQ with your
computer using:
mini-USB synchronization cable
Bluetooth
To synchronize your HP iPAQ and your computer using the mini-USB synchronization cable:
1.
Make sure ActiveSync 4.5 or later is installed on your computer.
2.
Plug the USB end of the mini-USB synchronization cable into your computer.
3.
Connect the mini-USB end of the synchronization cable to the universal synchronize connector on
the bottom of your HP iPAQ. Synchronization begins automatically.
CAUTION:
connectors are properly aligned before connecting them.
4.
Click Next on the Synchronization Setup Wizard screen.
5.
Perform one of the following:
By default, the check box is selected to synchronize directly with a Microsoft Exchange Server.
Clear this check box if you do not want to synchronize directly with a Microsoft Exchange
server and then click Next.
Click Next if you want to synchronize directly with Microsoft Outlook.
6.
When the Synchronization Options screen displays, select the items you want to synchronize
between your HP iPAQ and your computer and then click Next.
7.
After your items have been synchronized, click Finish. The Synchronization Setup Wizard starts
synchronizing the items you selected.
If ActiveSync does not begin the synchronization process, start it manually: On your computer, open
ActiveSync by selecting Start > All Programs > Microsoft ActiveSync.

Changing the Type of ActiveSync Connection

You can change the type of ActiveSync connection being used between your HP iPAQ and your
computer to meet your specific needs.
You should use USB Serial Sync mode if you:
Are having general problems with the ActiveSync connection between your HP iPAQ and your
computer.
Need to connect your HP iPAQ to your computer while you are using a Virtual Private Network
(VPN) tunnel from your computer.
Are running personal or company-enforced firewall software on your computer.
16
Chapter 5 Learning the Basics
To avoid damaging your HP iPAQ or the AC adapter, check to make sure all

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents