Connecting To Other Devices; Identifying The Communications Port; Establishing An Activesync Connection - HP iPAQ h4000 Series User Manual

Connecting to Other Devices

Use ActiveSync, serial and dial-up connections to communicate
with other Bluetooth devices. Establish a partnership with a cell
phone and set up the Bluetooth services it offers.

Identifying the Communications Port

You can identify the virtual COM ports used to create a
serial port connection. You may need to identify these COM
ports for activities such as printing.
Use the inbound COM port when other devices initiate a serial
connection. Use the outbound COM port when you initiate a
serial connection to another device.
To identify the communications port:
1. From the Today screen, tap the Bluetooth icon > Bluetooth
Settings.
2. Tab over to the Serial Port tab and tap it.
3. Note the names of your inbound and outbound COM ports.
4. Tap OK.

Establishing an ActiveSync Connection

You can set up an ActiveSync partnership with a
Bluetooth-enabled computer by first setting up your computer,
then setting up your iPAQ Pocket PC.
If you own an HP Evo Notebook or Desktop computer, you can
use the Bluetooth Multiport Module presinstalled on that
computer with your iPAQ Pocket PC.
If you are using other Bluetooth modules or cards on your
computer, refer to the Bluetooth Configuration Manager or
Settings for similar setup procedures, then skip to
ActiveSync Partnership on Your iPAQ Pocket PC."
User's Guide
Using Bluetooth
"Setting Up an
8–16