Table of Contents
Advertisement
Using Shooting Functions
Shooting Image
Taking Photos
1.
Turn on the camera by pressing the
button.
2.
Frame the shot using the focus bracket on the
LCD monitor. See Image 1.
3.
Press the shutter button half-way down. The
camera automatically adjusts the focus and
exposure. When the camera is ready to take
the photo, the frame bracket turns green, the
shutter speed and aperture value are displayed
See Image 2.
4.
Fully press the
Note
When the shake warning icon
camera steadily.
Using the Stabilizer
The Stabilizer function helps reduce blurred images caused by shaking.
1.
Enable the Stabilizer in the Setup Menu as described on page 32.
2.
Use the
3.
Press the
Note
•
If Stabilizer is enabled, the stabilizer icon is displayed on the LCD monitor and the ISO
setting is automatically set to Auto.
button to capture image.
appears, hold the
or
keys to go through the selection.
button to save and apply changes.
12M
0.0EV
0.0EV
21
307
307
AUTO
ISO
Image 1
F 3.0
F 3.0
1/ 30
1/ 30
AUTO
ISO
Image 2
Advertisement
Table of Contents
