Speakers
To remove the speakers, use this procedure and illustration.
Table 5-4
Speaker description and part number
Description
Speaker Kit
Before removing the speakers, follow these steps:
1.
Prepare the computer for disassembly (see
2.
Remove the bottom cover (see
3.
Remove the battery (see
Remove the speakers:
1.
Disconnect the speaker cable from the system board (1).
2.
Remove the two Phillips M2.0 × 4.8 screws (2) that secure each speaker to the computer.
3.
Remove the speakers from the computer (3) while removing the cable from the routing along the
bottom of the battery.
Reverse this procedure to install the speakers.
Touchpad
To remove the touchpad, use this procedure and illustration.
Preparation for disassembly on page
Bottom cover on page
Battery on page
28).
26).
Component replacement procedures
Spare part number
L91528-001
26).
31