Table of Contents
Advertisement
Quick Links
Argon Wall Mounted
NMARWH90
NMARWH110
NMARWH140
SAFETY INFORMATION
WARNING
If the information in these instructions are
not followed exactly, a fire or explosion
may result causing property damage,
personal injury or loss of life.
Do not store or use gasoline or other flammable vapors
and liquids in the vicinity of this or any other appliance.
INSTALLER: LEAVE THIS MANUAL WITH THE APPLIANCE.
CONSUMER: RETAIN THIS MANUAL FOR FUTURE REFERENCE.
Advertisement
Table of Contents
Related Manuals for Stanley Argon NMARWH90
Summary of Contents for Stanley Argon NMARWH90
- Page 1 Argon Wall Mounted NMARWH90 NMARWH110 NMARWH140 SAFETY INFORMATION WARNING If the information in these instructions are not followed exactly, a fire or explosion may result causing property damage, personal injury or loss of life. Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.
-
Page 2: Table Of Contents
Please read and carefully follow all of the instruction found in this manual. Please pay special attention to the safety instructions provided in this manual. The instructions included here will as sure that you have many years of dependable and enjoyable service from your Stanley product. -
Page 3: Important Instructions
IMPORTANT INSTRUCTIONS PLEASE RETAIN THIS USER GUIDE FOR FUTURE REFERENCE When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following: 1) Read all instructions before using this fireplace 2) The fireplace is hot when in use. -
Page 4: Unpacking And Testing The Appliance
UNPACKING AND TESTING APPLIANCE Carefully remove the appliance from the box. Prior to installing the appliance, test to make sure the appliance operates properly by plugging the power supply cord into a conveniently located 240 Volt grounded outlet. There are two screws on each side to fix the front glass. Please see the figure right side. -
Page 5: Nmarwh90
NMARWH90 Description Built-in or Wall Mount Appliance Voltage 230V ac 50Hz Watts 1900W Max NO HEATER MOTOR HEATER Appliance Width 25 1/2” or 64.9 cm Appliance Height 21 1/8” or 53.6 cm Appliance Depth 6 1/8” or 15.5 cm Gross Weight 55.68 lbs or 25.31kgs Plug Location Left side... -
Page 6: Nmarwh110
NMARWH110 Description Built-in or Wall Mount Appliance Voltage 230V ac 50Hz Watts 1900W Max NO HEATER MOTOR HEATER Appliance Width 33 1/2” or 85.2 cm Appliance Height 21 1/8” or 53.6 cm Appliance Depth 6 1/8” or 15.5 cm Gross Weight 65.78 lbs or 29.90kgs Plug Location Left side... -
Page 7: Nmarwh140
NMARWH140 Description Built-in or Wall Mount Appliance Voltage 230V ac 50Hz Watts 1900W Max NO HEATER MOTOR HEATER Appliance Width 47 1/2” or 120.7 cm Appliance Height 21 1/8” or 53.6 cm Appliance Depth 6 1/8” or 15.5 cm Gross Weight 82.17 lbs or 37.35kgs Plug Location Left side... -
Page 8: Installation Wall-Mount
INSTALLATION-WALL MOUNT 1. Select a location that is not prone to moisture and is located at least 0.91 m or 3 feet away from combustible materials such as curtains or drapes, furniture, bedding ,paper, etc. 2. Referring to Fig. 1 below select a suitable position in which to mount the heater horizontally –... -
Page 9: Installation Built-In
INSTALLATION- BUILT-IN 1. Select a location that is not prone to moisture and is located at least 0.91m or 3 feet away from combustible materials such as curtains or drapes, furniture, bedding, paper, etc. 2. Mark the desired location on the floor and store appliance in a safe, dry and dust free location. -
Page 10: Media Options
MEDIA OPTIONS The media that come with this appliance are 2. Installing the fire glass media. Pour the Log Set, Clear glass, Suntea glass and White decorative media into the tray. Feel free Vermiculite. Consumers may purchase optional to use any combination of fire glass decorative media if they choose. -
Page 11: Operation
OPERATION The Fireplace operates by using either the touch panel located on the upper left hand corner or by remote control. Plug the fireplace into a 15 Amp wall socket. Plug the fireplace into a 15 Amp wall socket. MANUAL OPERATION Press to turn on and off the fireplace. -
Page 12: Remote Control Operation
REMOTE CONTROL OPERATION For remote to function make sure the fireplace is plugged in and the remote has batteries. Important: When operating the remote make sure you point the remote to the center of the fireplace. Each time you press the button, the buzzer inside the unit will beep once. It takes some time for the receiver to respond to the transmitter. - Page 13 AUTO means fireplace can automatically adjust to the temperature you set. When in AUTO, you can set the desired temperature with keys. You can switch temperature between Celsius and Fahrenheit with keys.When it is on Auto mode, fireplace operate at 1900W. Press this button to adjust the speed of the flame.
-
Page 14: Wifi Operation
WIFI OPERATION INSTALL TuyaSmart life There are 2 ways to install TuyaSmart; 1. Search for “TuyaSmart life” in the APP store on your phone, download and install. 2. Scan the QR code below with your mobile phone. WIFI SETTING AND FIREPLACE OPERATION 1. - Page 15 FIG.4 3. Press (flame button) on the touch panel of the fireplace for more than 5 seconds when the fireplace in standby mode. There will be 2 beeps come out from the fireplace and the (flame button) will flash as well indicating that Wi-fi is in EZ mode. Then please confirm to go next.
- Page 16 6. Now you are in the interface like FIG.7. You can operate the fireplace via Wi-fi. FIG.7 NOTE: Turn off the flashing blue Wifi indicator light Touch the (power button) once, the blue light will stop flashing.
-
Page 17: Care And Maintenance
CARE AND MAINTENANCE 1. Switch off and unplug from the power supply before cleaning. 2. Using a soft, moist cloth, with or without a mild soap solution, carefully clean the exterior surface of the products. CAUTION: Allow the product to completely cool before handling or cleaning it. 3. -
Page 19: Exploded View
EXPLODED VIEW... -
Page 20: Trouble Shooting
TRUBLE SHOOTING PROBLEM POSIBBLE CAUSE SOLUTION Dim or no flame Flame LED’s are burnt out Inspect the LED’s and replace them if necessary. Ember Ember LED’s are burnt out Inspect the ember bed LED’s and glowing or dimming replace them if necessary. Appliance turns Appliance... -
Page 21: Service History
SERVICE HISTORY This heater must be serviced annually depending on usage. Date Dealer Service technician Service Performed Special Concerns Name Name NOTES:... -
Page 22: Warranty
All warranty claims must be reported to the Waterford Stanley Service Department and must be submitted with the product serial number (located on the front of this manual), date of purchase, proof of purchase (if requested) and details of the specific nature of the problem.