Table of Contents
Advertisement
Quick Links
Argon Built In
NMARBI100
NMARBI130
SAFETY INFORMATION
WARNING
If the information in these instructions are
not followed exactly, a fire or explosion
may result causing property damage,
personal injury or loss of life.
Do not store or use gasoline or other flammable vapors
and liquids in the vicinity of this or any other appliance.
INSTALLER: LEAVE THIS MANUAL WITH THE APPLIANCE.
CONSUMER: RETAIN THIS MANUAL FOR FUTURE REFERENCE.
Version:202111
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Stanley NMARBI100
Summary of Contents for Stanley NMARBI100
- Page 1 Argon Built In NMARBI100 NMARBI130 SAFETY INFORMATION WARNING If the information in these instructions are not followed exactly, a fire or explosion may result causing property damage, personal injury or loss of life. Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.
-
Page 2: Table Of Contents
TABLE OF CONTENTS Please read and carefully follow all of the instruction found in this manual. The instructions included here will assure that you have many years of dependable and enjoyable service from your Stanley product. IMPORTANT INSTRUCTIONS ............................UNPACKING AND TESTING THE APPLIANCE ...................... -
Page 3: Important Instructions
IMPORTANT INSTRUCTIONS PLEASE RETAIN THIS USER GUIDE FOR FUTURE REFERENCE When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following: 1) Read all instructions before using this fireplace 2) The fireplace is hot when in use. -
Page 4: Unpacking And Testing The Appliance
UNPACKING AND TESTING APPLIANCE Carefully remove the appliance from the box. Prior to installing the appliance, test to make sure the appliance operates properly by plugging the power supply cord into a conveniently located 240 Volt grounded outlet. LOCATING THE FIREPLACE Plan where to locate and frame the fireplace. -
Page 5: Nmarbi100
NMARBI100 Description Built-in Appliance Voltage 230V ac 50 Hz Watts 1900W Max NO HEATER MOTOR HEATER Appliance Width 38 5/8” or 98.1 cm Appliance Height 23 5/8” or 60 cm Appliance Depth 6 3/4” or 17.2 cm Gross Weight 88 lbs or 40kg... -
Page 6: Nmarbi130
NMARBI130 Model Number BI-50-SLIM Voltage 230V ac 50Hz Watts 1900W Max NO HEATER MOTOR HEATER Appliance Width 48 5/8” or 123.5 cm Appliance Height 23 5/8” or 60 cm Appliance Depth 6 3/4” or 17.2 cm Gross Weight 105.6 lbs or 48kg Plug Location Left side Cord Length... -
Page 7: Safety Drill Screw Area
SAFETY DRILL SCREW AREA There is a safety drill screw area as show below. Please make sure that the fix screws are in this area. Sa fe ty d rill s cre w a re a (Da rk a re a ) MANTEL CLEARANCE The clearance to the mantel should be 4”/ 105mm minimum when a mantel is applied (Measurement is taken from the trim). -
Page 8: Installation
Note: The optional trim can be pulled out directly from the unit. It will need two people to do it. The rough wall opening size of the fireplace: NMARBI100 40”/ 101.6cm 7”/ 17.78cm 25”/ 63.5cm... - Page 9 2. Remove the framing plates from the unit framing plate 3. Re-fix the framing plates to the unit as the picture shows framing plate...
- Page 10 4. Bend up the framing plates. 5. Put the unit into the opening.
- Page 11 6. Drive the mounting screws into the framing plates on the unit and the wall studs. framing plate 7. After checking that the fireplace operates properly, cover the glass panel with protective plastic bag and install plywood or drywall. NOTE: In order to use the supplied trim kit, the thickness of the desired wall finish can not exceed 1 inch.
- Page 12 8. Decorate the plywood or drywall with glazed tile, wallpaper, etc. Fireplace 9. Put back the optional trim, that you've removed from the unit at step 1 if required. trim...
-
Page 13: Media Options
MEDIA OPTIONS The media that come with this appliance are 2. Installing the fire glass media. Pour the Log Set, Clear glass, Suntea glass and White decorative media into the tray. Feel free Vermiculite. Consumers may purchase optional to use any combination of fire glass decorative media if they choose. -
Page 14: Operation
OPERATION The Fireplace operates by using either the touch panel located on the upper left hand corner or by remote control. Plug the fireplace into a 15 Amp wall socket. Plug the fireplace into a 15 Amp wall socket. MANUAL OPERATION Press to turn on and off the fireplace. -
Page 15: Remote Control Operation
REMOTE CONTROL OPERATION For remote to function make sure the fireplace is plugged in and the remote has batteries. Important: When operating the remote make sure you point the remote to the center of the fireplace. Each time you press the button, the buzzer inside the unit will beep once. It takes some time for the receiver to respond to the transmitter. - Page 16 AUTO means fireplace can automatically adjust to the temperature you set. When in AUTO, you can set the desired temperature with keys. You can switch temperature between Celsius and Fahrenheit with keys.When it is on Auto mode, fireplace operate at 1900W. Press this button to adjust the speed of the flame.
-
Page 17: Wifi Operation
WIFI OPERATION INSTALL TuyaSmart life There are 2 ways to install TuyaSmart; 1. Search for “TuyaSmart life” in the APP store on your phone, download and install. 2. Scan the QR code below with your mobile phone. WIFI SETTING AND FIREPLACE OPERATION 1. - Page 18 FIG.4 3. Press (flame button) on the touch panel of the fireplace for more than 5 seconds when the fireplace in standby mode. There will be 2 beeps come out from the fireplace and the (flame button) will flash as well indicating that Wi-fi is in EZ mode. Then please confirm to go next.
- Page 19 6. Now you are in the interface like FIG.7. You can operate the fireplace via Wi-fi. FIG.7 NOTE: Turn off the flashing blue Wifi indicator light Touch the (power button) once, the blue light will stop flashing.
-
Page 20: Care And Maintenance
CARE AND MAINTENANCE 1. Switch off and unplug from the power supply before cleaning. 2. Using a soft, moist cloth, with or without a mild soap solution, carefully clean the exterior surface of the products. CAUTION: Allow the product to completely cool before handling or cleaning it. 3. -
Page 21: Replacement Parts
REPLACEMENT PARTS Ref. Description Quantity NMARBI100 NMARBI130 Blower & Heater Assembly 602083F 602083F Fireplace Box Touch Panel 10124003 10124003 Circuit Board 10124129 10124129 Flame Motor 1010501 1010501 Flicker Assembly 3109502F 3057503D Qty Required Based LED Strip 601144 – Qty 6 601144 –... -
Page 22: Exploded View
EXPLODED VIEW... -
Page 23: Trouble Shooting
TROUBLE SHOOTING PROBLEM POSSIBLE CAUSE SOLUTION Dim or no flame Flame LED’s are burnt out Inspect the LED’s and replace them if necessary. Ember Ember LED’s are burnt out Inspect the ember bed LED’s and glowing or dimming replace them if necessary. Appliance turns off and Appliance has overheated and Turn off the main switch, allow... -
Page 24: Service History
SERVICE HISTORY This heater must be serviced annually depending on usage. Date Dealer Service technician Service Performed Special Concerns Name Name NOTES:... -
Page 25: Warranty
All warranty claims must be reported to the Waterford Stanley Service Department and must be submitted with the product serial number (located on the front of this manual), date of purchase, proof of purchase (if requested) and details of the specific nature of the problem.
Need help?
Do you have a question about the NMARBI100 and is the answer not in the manual?
Questions and answers