Sensitivity Settings - Bosch wLSN System Reference Manual

32 en | wLSN Devices
Figure 5.11 Adjusting the wLSN Inertia Detector
Callout
1
2
3
NOTICE!
Route the wiring from the sensor element so it does not make
contact with the tamper spring. Refer to Figure 5.12.
Figure 5.12 Routing the Wiring in the wLSN Inertia Detector
5.7.1

Sensitivity Settings

All sensitivity settings are programmed at the control panel
(refer to your control panel's documentation for more
information).
The sensor element has two types of detection:
–
–
Gross Attack is always enabled. Minor Attack is very sensitive
and can be disabled.
F01U138553 | 01 | 2010.05
1
Description
Remove the sensor element
Turn the sensor element as needed
Ensure that the arrow on the sensor element points up
Gross Attack
Minor Attack
System Reference Guide
3
2
90
.
.
.
Bosch Security Systems, Inc.
wLSN