Viewing And Correcting The List - HP 17bll+ User Manual

After briefly showing ITEM(1), the display shows
 
 =number
TOTAL is the updated, running TOTAL of all the numbers in the list
(only one number, so far).
4. To enter ITEM(2), key in the value and press
ITEM(3) and the new, updated total appear.
5. Continue entering values for ITEM(3), ITEM(4), etc. The calculator
recognizes the end of the list when an item is left blank (no value is
entered).
6. Press to end the list and restore the SUM menu. You can now
e
proceed to correct the list, name the list, get another list, or do
statistical calculations.
Use these same instructions to enter additional lists.

Viewing and Correcting the List

To display a particular list, use
The [ and ] keys move up and down the list one number at a time.
and
@[ @]
Changing or Clearing a Number. To change a number after it's been
entered: display the number, key in the new value, and press
Use the same method to clear a number to zero. (Do not press
< , which clears the calculator line.)
Inserting Numbers into a List. Insertion occurs before (or above) the
current entry. Pressing
of the list. You can then enter a new value.
For example, if ITEM(6) is in the display, pressing
zero item between the previously numbered ITEM(5) and ITEM(6).
124 10: Running Total and Statistics

display the beginning and end of the list.
 inserts a zero item and renumbers the rest
. The prompt for
I
(see page 127).

.
I
or
C
puts a new,