Important Information for the User
Information importante pour l'utilisateur
NAVIGATION AV SYSTEM
SISTEMA DE NAVEGACIÓN AV
NAVIGATIONS-/AV-SYSTEM
SYSTEME DE NAVIGATION AV
SISTEMA DI NAVIGAZIONE AV
AV NAVIGATIESYSTEEM
AVIC-F20BT
AVIC-F920BT
AVIC-F9210BT
AVIC-F9220BT
Be sure to read both this leaflet and Operation Manual contained on the
CD-ROM accompanying this navigation system! Both documents
include important information that you must understand before using
this navigation system.
Asegúrese de leer tanto este folleto como el Manual de operación que
se encuentran en el CD-ROM incluido en este sistema de navegación.
Ambos documentos incluyen información importante que deberá
comprender antes de utilizar este sistema de navegación.
Bitte lesen Sie sowohl diese Broschüre als auch die
Bedienungsanleitung auf der mit diesem Navigationssystem gelieferten
CD-ROM. Beide Dokumente enthalten wichtige Informationen, die Sie
vor Gebrauch des Navigationssystems wissen sollten.
Assurez-vous de lire le feuillet ainsi que le manuel de fonctionnement
sur le CD livré avec ce système de navigation ! Les deux documents
comportent des informations importantes que vous devez comprendre
pour pouvoir utiliser ce système de navigation.
Leggere questo opuscolo e il Manuale di funzionamento contenuto sul
CD-ROM fornito con il sistema di navigazione. Entrambi i documenti
contengono informazioni importanti che devono essere comprese prima
di utilizzare il sistema di navigazione.
Lees dit boekje en de Bedieningshandleiding op de CD-ROM die bij dit
navigatiesysteem wordt geleverd zorgvuldig door! Beide documenten
bevatten belangrijke informatie die u moet begrijpen voordat u dit
navigatiesysteem gebruikt.
Need help?
Do you have a question about the AVIC-F20BT and is the answer not in the manual?
Questions and answers
rear cam no display
The rear camera on the Pioneer AVIC-F20BT may not be displaying due to the following reasons:
1. Camera Settings: The "Camera" setting in the "Back Camera Settings" menu may not be set to "On." It needs to be enabled for the rear camera to function.
2. Polarity Setting: The polarity setting may not be correctly configured. Try switching to the opposite polarity (normally set to Battery +12V) depending on how the reverse sensor is wired.
3. Wiring Issues: The violet/white lead must be properly connected to the reverse gear signal. If not connected correctly, the camera image will not appear automatically when reversing.
4. Faulty or Disconnected Camera: If there is no camera installed, the system may still be trying to display a rear camera view. If a camera is installed, check if it is properly connected and functioning.
5. System Reset: If settings are correct but the issue persists, try disconnecting the car battery for a few minutes to reset the system.
If none of these solutions work, further troubleshooting may be required.
This answer is automatically generated