Displaying Obstacle Detection Information; Displaying The Operating Status Of The Climate Control Panel; System Settings; Displaying The "System" Setting Screen - Pioneer AVIC-F980DAB Operation Manual

Vehicle equip-
ment information
Displaying obstacle detection
information
CAUTION
This function is intended solely to assist the driver's vision.
It does not detect all dangers and obstacles and is not a
substitute for your attentiveness, judgement, and care while
parking your vehicle.
p This function is only available for vehicles equipped with a
parking sensor system.
p The "Parking Assist" screen is not displayed until this
product boots up completely.
1 Turn on the parking assist sensor on your
vehicle.
The "Parking Assist" screen appears.
Displaying the operating status
of the climate control panel
When you operate the climate control panel of the vehicle, the
screen switches automatically to the "A/C Control" screen.
p The settings of the climate control panel operated before this
product is started are not displayed on the screen.
p Any climate control panel settings of the vehicle that are
turned off are not displayed on the screen.
p If the information displayed on the screen is reversed for
the left and right sides of the vehicle, change the "Climate
Reverse" setting to "On".
 Refer to Reversing the climate control status display on
page 60
58

System settings

Displaying the "System" set-
ting screen
1 Press the button.
2 Touch , and then .
Setting the navigation informa-
tion bar
You can set whether to display the guidance information of the
navigation on the AV operation screen.
1 Display the "System" setting screen.
 Refer to Displaying the "System" setting screen on page
58
2 Touch [Navigation Related Settings].
3 Touch [Navigation info window] to switch
"On" or "Off".
Setting navigation screen
interruption
You can set whether to automatically switch to the navigation
screen from the AV screen or the application screen when your
vehicle approaches a guidance point such as an intersection.
1 Display the "System" setting screen.
 Refer to Displaying the "System" setting screen on page
58
2 Touch [Navigation Related Settings].
3 Touch [AV/App Guide Mode] to switch "On" or
"Off".
Setting Bluetooth audio source
activation
The default setting is "On".
1 Display the "System" setting screen.
 Refer to Displaying the "System" setting screen on page
58
2 Touch [AV Source Settings].
3 Touch [Bluetooth Audio] to switch "On" or
"Off".

Setting the ever scroll

When "Ever Scroll" is set to "On", the recorded text information
scrolls continuously in the display while the vehicle is stopped.
The default setting is "Off".
1 Display the "System" setting screen.
 Refer to Displaying the "System" setting screen on page
58
2 Touch [Ever Scroll] to switch "On" or "Off".

Setting the beep tone

The default setting is "On".
1 Display the "System" setting screen.
 Refer to Displaying the "System" setting screen on page
58
2 Touch [Beep Tone] to switch "On" or "Off".

Setting the rear view camera

A separately sold rear view camera (e.g. ND-BC8) is required
for utilising the rear view camera function. (For details, consult
your dealer.)
Rear view camera
This product features a function that automatically switches to
the full-screen image of the rear view camera installed on your
vehicle, when the gearstick is in the REVERSE (R) position.
Camera View mode also allows you to check what is behind you
while driving.
Camera for Camera View mode
Camera View can be displayed at all times. Please note that
with this setting, the camera image is not resized to fit, and that
a portion of what is seen by the camera is not viewable.
To display the camera image, touch [Camera View] on the AV
source selection screen.
 Refer to Source on the AV source selection screen on page
9
p To set the rear view camera as the camera for Camera View
mode, set "Back Camera Input" to "On".
p When using the 2nd camera, set "AV Input" to "Camera".
CAUTION
Check to make sure settings for rear view camera displays a
mirror reversed image.
p Immediately verify whether the display changes to a
rear view camera image when the gearstick is moved to
REVERSE (R) from another position.