Protecting Your Product Against Theft; Notes On Using The Lcd Panel; Adjusting The Lcd Panel Angle; Inserting/Ejecting/Connecting Media - Pioneer AVIC-F980DAB Operation Manual

Basic operation
3 MAP Press to display the map screen.
button Press and hold to switch to the camera view
mode.
p This function is available only when " Back
Camera Input" or "2nd Camera Input" is
set to "On".
4 Press to display the top menu screen.
button
Press and hold to activate the voice recogni-
tion function.
 Refer to Using the voice recognition func-
tion on page 33
5 MODE Press to switch between the Application
button screen and the AV operation screen.
Press to turn the display off.
p Press and hold to turn the display off when
the Application screen is available.
p When the display is turned off, touch the
screen to revert to the original screen.
6 Press to return to the previous track (chapter)
TRK (
or go to the next track (chapter).
/ )
Press and hold to perform fast reverse or fast
button
forwards.
Press to answer or end a call.
7
button
 Refer to Resetting the microprocessor on
8 RESET
button page 4
9 Disc-  Refer to Inserting and ejecting a disc on
loading page 6
slot
10 SD card  Refer to Inserting and ejecting an SD
slot
memory card on page 6
11 Auto EQ Use to connect a microphone for acoustical
micro- measurement (sold separately).
phone
input jack
12 Detachable faceplate
13 Press to remove the detachable faceplate from
button
this product.
p The remote control CD-R33 (sold separately) is available.
 For details, refer to the remote control manual.
Protecting your product against
theft
F980DAB F980BT F9880DAB F9880BT
CAUTION
 Do not expose the detachable faceplate to excessive shock
or disassemble it.

Never grip the buttons tightly or use force when removing
or attaching the detachable faceplate.
 Keep the detachable faceplate out of reach of small
children to prevent them from placing it in their mouths.
 After removing the detachable faceplate, keep it in a safe
place so it is not scratched or damaged.

Do not expose the detachable faceplate to direct sunlight
and high temperatures.
 When removing or attaching the detachable faceplate, do
so after turning off the ignition switch (ACC OFF).
Removing the detachable faceplate
1 Press the button.
2 Gently grip the bottom of the detachable face-
plate and slowly pull it outward.
1
1 Detachable faceplate
Attaching the detachable faceplate
1 Slide the detachable faceplate all the way into
this product.
2 Push the lower part of the detachable faceplate
until you hear a click.

Notes on using the LCD panel

F88DAB F80DAB
WARNING
 Keep hands and fingers clear of this product when
opening, closing, or adjusting the LCD panel. Be especially
cautious of children's hands and fingers.
 Do not use with the LCD panel left open. It may result in
injury in the event of an accident.
CAUTION
 Do not open or close the LCD panel by force. It may cause
a malfunction.

Do not operate this product until the LCD panel has
completely opened or closed. If this product is operated
while the LCD panel is opening or closing, the LCD panel
may stop at that angle for safety.
 Do not place a glass or can on the open LCD panel.

Adjusting the LCD panel angle

F88DAB F80DAB
1 Press the button.
2 Touch or to adjust the angle of the
LCD panel.
3 Touch .
Returns to the previous screen.
Inserting/ejecting/connecting
media
CAUTION
 Do not insert anything other than a disc into the disc-
loading slot.

Do not insert anything other than SD memory cards into
the SD card slot.
 Ejecting an SD memory card during data transfer can
damage the SD memory card. Be sure to eject the SD
memory card by the procedure described in this manual.
 Do not press the button when an SD memory card is not
fully inserted. Doing so may damage the card.

Do not press the button before an SD memory card has
been completely removed. Doing so may damage the card.
5