Table of Contents
Advertisement
7.7.3
Mounting variant "Glue base plate"
With this type of installation, you first glue the base plate onto the foundation
or the finished floor. Then mount the pedestrian gate on the base plate.
Required material (not enclosed):
›
Base plate FURA100
›
Attachment set BSKL100 for gluing the base plate
›
Attachment set BSS100 for mounting the pedestrian gate on the base plate
(foundation anchors and composite mortar are not required)
Prerequisites
›
The foundation / finished floor was erected.
›
The empty conduits were laid.
›
The foundation / finished floor has hardened.
ä Base plate and drilling template: Page 41, Fig. 14
IMPORTANT!
Follow the separate instructions and packaging labels for the sur-
face cleaner, construction adhesive and remover.
The floor must be free of paint and varnish.
Installation and assembly
mWing
49
Advertisement
Table of Contents
Need help?
Do you have a question about the MHTM FlowMotion mWing and is the answer not in the manual?
Questions and answers