Wiring - Siemens LMV60.110A2 Installation Manual

Smart Infrastructure

10 Wiring

Separate wiring is recommended for the following cables:
Completely separate from all other cables

High-voltage ignition cable – see also chapter Ignition

Cable for the flame detectors
Together in cable channel 1 for low voltage, e.g.:

CAN bus cable
Together in cable channel 2 for mains voltage, e.g.:

Cable for ignition transformer

Cables for other mains voltage signals, e.g., gas pressure switch and air pressure
switch.
LMV6 Installation Guide
10 Wiring
32/39
CC1J7560en
4/21/2020