3. PRODUCT INFORMATION
Rated Power: 120W
Power Adapter: External AC100~240V
50/60Hz DC19V 6.3A
IP Rating: IP52
Channel: 15CH
Laser Diodes: Red 638nm 2W, Green
520nm 2W, Blue 450nm 6W
Spot Divergence angle: Red<1.8mrad,
Green<1.0mrad, Blue<2.75mrad
Emitting Spot: Red: 6x4mm, Green:
6x2mm, Blue: 6x3mm
Dimming: 0~5V, Analog dimming >100KHz
4. INSTALLATION
The unit should be mounted via its screw
holes on the bracket. Always ensure that
the unit is firmly fixed to avoid vibration
and slipping while operating. Always
ensure that the structure to which you are
attaching the unit is secure and is able to
support a weight of 10 times of the unit's
5. CONNECTION
The device is equipped with the following
interfaces:
1. DMX (in/out): XLR 3(5)-pin socket
2. Power (in/out): powerCON socket
5.1 Connecting DMX signal
The connection is performed using cable
with XLR-female -> XLR-Male plugs.
CAUTION! At the last fixture, the
DMX signal has to be terminated with a
terminator. Solder a 120Ω resistor between
signal (-) and signal (+) into a XLR plug and
plug it in the DMX output of the last fixture.
DMX
Controller
LASER 10W RGB GOBO • Art No F4000169
Lifespan: >10000hrs
Scanner: 30Kpps ±30°(maximum)
Control mode: Sound / Auto / DMX512
/ ILDA computer connection control,
the machine is equipped with manual
adjustment of XY mirroring, and the laser
brightness can be manually adjusted
Working Temperature: -10°C ~ 40°C
Dimension: 230*206.8*146.3mm
(without handle)
Weight: 3,6 kg (4kg)
Type of packaging: Carton Box
weight. Also always use a safety cable that
can hold 12 times of the weight of the unit
when installing the fixture. The equipment
must be fixed by professionals. And it must
be fixed at a place where is out of the touch
of people and has no one pass by or under
it.
2
FEMALE
XLR
1
5
DMX 512
GROUND
1
DMX +
3
DMX -
3-pin XLR
GROUND
DMX -
DMX +
2
3
5-pin XLR
4
FEMALE
XLR
DMX 512
1
3
2
MALE
XLR
2
1
3
4 5
MALE
XLR