TypeS PROJUMP 15000 User Manual page 7

CHARGING THE PROJUMP 15000:
At home:
110-120V AC Adapter
1. Plug bundled 110-120V AC adapter into wall socket.
2. Connect the DC jack of the AC adapter into the DC
charge input port on the PROJUMP.
3. Disconnect the PROJUMP when it is fully charged. Store
the PROJUMP in a safe place when not in use.
NOTE: In order to reduce the risk of fire or electric shock, only use
the AC adapter as provided by manufacturer.
Micro USB Cable
1. Plug bundled Micro USB Charging Cable into a USB-A
port on a 2A USB wall adapter (not included).
2. Connect the Micro USB Charging Cable into the Micro
USB Charge Input Port on the PROJUMP.
3. Disconnect the PROJUMP when it is fully charged. Store
the PROJUMP in a safe place when not in use.
USB-A to USB-C Cable / USB-C to USB-C Cable
(cables not included)
1. Plug one end of USB-C Charging Cable into a
USB-A or USB-C port on a 30W (or above) wall
adapter (not included).
2. Connect the other end of USB-C Charging Cable into
the USB-C Charging Input Port on the PROJUMP.
3. Disconnect the PROJUMP when it is fully charged.
Store the PROJUMP in a safe place when not in use.
In Car:
1. Plug bundled Micro USB Charging Cable into bundled 12V USB
Charger then connect it to 12V socket in vehicle.
2. Connect the Micro USB Charging Cable into the Micro USB
Charge Input Port on the PROJUMP.
3. Disconnect the PROJUMP when it is fully charged. Store
the PROJUMP in a safe place when not in use.
NOTE: Fully charge the PROJUMP upon receipt. Check battery status periodically and recharge every 2-3
months and after every use to maintain the efficiency and to prolong the life of the internal battery.
TYPE-C
MIRCO
TYPE-A
TYPE-C
7
MIRCO TYPE-A
I N
TYPE-A MIRCO
I N
AC DC
TYPE-C TYPE-C
IN
TYPE-C
I N
MIRCO
I N
IN
TYPE-A
IN
TYPE-C
IN
I N
AC
I N
TYPE-C
TYPE-C
I N
MIRCO
I N
MIRCO
TYPE-A
I N
MIRCO
I N
TYPE-A
I N
TYPE-C
MIRCO
I N
TYPE-A
I N
TYPE-C
I N
TYPE-C
TYPE-C
AC
TYPE-A
MIRCO
AC
TYPE-C
AC
OUT
TYPE-A
TYPE-A
OUT
MIRCO
MIRCO
TYPE-C
TYPE-C