HP xw8400 Service And Technical Reference Manual page 89

3. While lifting the green drivelock release tab, slide the drive forward out of the chassis.
Figure 4-33
4. Remove the diskette drive from its bracket by removing the two M3 screws in the rear-most holes
and pulling the diskette drive from the bracket.
Figure 4-34
To replace a diskette drive:
1. Slide the diskette drive into the bracket, and secure it with two M3 screws.
2. While lifting the green drivelock release tab, slide the drive forward into the chassis.
ENWW
Removing the diskette drive from the chassis
Removing the diskette drive from the bracket
Removing and replacing components 81