4.
Lift the DIMM straight up, and remove it from the unit.
Figure 4-14
NOTE
when installing a DIMM.
Installing memory module
CAUTION
Because third-party DIMMs might not be electrically or thermally compatible, they are not
supported by HP.
You must load memory modules in valid configurations:
●
If loading only one DIMM, install it in slot 1. Otherwise, DIMMs must be loaded as matched pairs.
●
If loading two DIMMs, install them in slots 1 and 3.
●
If loading four DIMMs, install them in slots 1, 3, 5, and 7.
●
If loading six DIMMs, install them in slots 1 through 5, and 7.
●
If loading eight DIMMs, install them in all slots.
ENWW
Removing DIMM
DIMMs and DIMM sockets are keyed for proper installation. Be sure these guides align
HP only ships DIMMs that are electrically and thermally compatible with this product.
Removing and replacing components
67