Supported SAS RAID configurations
The following RAID configurations are supported on the HP xw8400 Workstation.
NOTE
the Linux environment, configure SW RAID configurations as provided by Red Hat Enterprise
Linux.
●
Up to 4 internal or external SAS hard disk drives
●
External connections require optional internal-to-external cable
●
SAS drives require SAS to SATA data and power converter
●
LSI MyStorage Utility for Windows
●
RAID 0 – Striped disk array
●
Two drives minimum
●
Improved I/O performance
●
No fault tolerance
●
RAID 1 — Mirrored disk array
●
Improved read performance
●
100% redundancy
●
Can recover from single drive failure
●
Two drives
●
RAID 1E
●
Three drives minimum
●
Can be an odd number of drives
●
Can always recover from a single drive failure, and in some cases, recover from two drive
failures
130
Appendix A Appendix A — SAS devices
This section does not apply to configuring RAID in the Linux environment. For RAID in
ENWW