HP xw6000 Installation Instructions Manual page 5

2. Align the heatsink posts with the holes on the system board 1. The fan must be facing toward the
front of the workstation. Connect the heatsink wire to the second processor heatsink fan connector on
the system board 2.
3. Tighten the four heatsink screws. First, tighten all screws partially so that the heatsink remains level.
Next, fully tighten one pair of diagonally opposite screws 1, then fully tighten the remaining pair 2.
Tighten to 6 in.-lbs. of torque.
Step 6—Reassemble the workstation
After installing the second processor and related components, reassemble the workstation using the
instructions in the workstation documentation. The reassembly process involves reinstalling the side
access panel and restoring power to the workstation.
Figure 4 Install heatsink
Figure 5 Tighten heatsink screws
5/12
Second Xeon processor installation