HP xw6000 Installation Instructions Manual page 4

2. Raise the processor socket handle fully 1. Open the processor socket cover plate 2.
3. Remove the plastic cover from the processor. Align the notches in the processor base with the tabs on
the socket. Seat the processor into the socket. Ensure that the underside of the processor is level with
the top of the processor socket. Close the processor cover plate. Lightly press down on the processor
cover plate while closing the socket lever.
Step 5—Install the CPU heatsink
1. Remove and discard the thermal grease protective liner from the bottom of the new heatsink and set
the heatsink over the processor.
✎
NOTE: Do not touch the exposed thermal grease when handling the CPU heatsink.
Figure 2 Open processor socket
Figure 3 Install processor
4/12
Second Xeon processor installation