southpaw enterprises 1820 Instruction Sheet

southpaw enterprises, inc.
Instruction Sheet
Infant Adaption Kit 1820
Take time to familiarize yourself with the use and maintenance of this equipment before using. Please file
this Instruction Sheet in an accessible location: the Instruction Sheet must be read and familiar to anyone
who is using Southpaw Enterprises Equipment.
IMPORTANT: Please check equipment immediately for any damage
that may have resulted during shipping. If any damage has occurred,
please contact Southpaw Enterprises, Inc. immediately.
MATERIALS LIST:
1 - Infant Adaption Kit
1 - Matress
1 - Instruction Sheet
1 - Maintenance Checklist
Note: Must be used with Southpaw Platform Swing
(not included).
(Remember: Southpaw Safety Rotational Device must
be used or damage to the equipment will result).
WARNING: Never leave an infant unattended in the
swing. The sides of the Infant Adaptation Kit are
meant only to keep an infant from rolling out of the
swing when in use. It is possible that an infant could
crawl or fall over the side without proper supervision.
The sides are not designed to be used in a chair back
fashion. After sides are in the closed position, test by
pulling on them to put them under stress. If they open
easily, reposition fasteners so that they hold properly.
Always use appropriate matting under and around the
swing.
ASSEMBLY PROCEDURES:
1. Place the Infant Adaption Kit on the Platform Swing
between the four ropes.
notches in the corners of the Infant Adaption Kit. (See
figure 1.).
Sides "B" and "D" have Southpaw labels. (These sides
are to be used as "doors").
The ropes will fit into the
Store these instructions in a safe place or
with the enclosed maintenance checklist
Warning: Failure to properly install a forged
steel eyebolt (1/2" or 5/8") may result in serious
injury or death. If you have any questions
about the installation of the forged steel
eyebolt, please contact Southpaw Enterprises
Customer Service at 1-800-228-1698.
®