Cisco VPN 3002 Reference Manual page 240

Hardware client
Hide thumbs Also See for VPN 3002:
Table of Contents

Advertisement

Monitoring | Statistics | MIB-II | ARP Table
Interface
The VPN 3002 network interface on which this mapping applies:
Physical Address
The hardwired MAC (Media Access Control) address of a physical network interface card, in 6-byte
hexadecimal notation, that maps to the IP Address. Exceptions are:
IP Address
The IP address that maps to the Physical Address.
Mapping Type
The type of mapping:
Action/Delete
To remove a dynamic, or learned, mapping from the table, click Delete. There is no confirmation or
undo. The Manager deletes the entry and refreshes the screen.
To delete an entry, you must have the administrator privilege to Modify Config under General Access
Rights. See Administration | Access Rights | Administrators.
You cannot delete static mappings.
VPN 3002 Hardware Client Reference
13-52
Private Interface
Public Interface
00 = a virtual address for a tunnel.
FF.FF.FF.FF.FF.FF = a network broadcast address.
Other = none of the following.
Invalid = an invalid mapping.
Dynamic = a learned mapping.
Static = a static mapping on the VPN 3002.
Chapter 13
Monitoring
OL-1893-01

Advertisement

Table of Contents
loading

Table of Contents