Table of Contents
Advertisement
Certificate Management
Enrolling and Installing Identity Certificates Automatically Using SCEP
Follow these steps for each identity certificate you want to obtain:
Step 1
Display the Administration | Certificate Management screen. (See
Step 2
Click Click here to enroll with a Certificate Authority. The Manager displays the Administration |
Certificate Management | Enroll screen. (See
Figure 12-23 Administration | Certificate Management | Enroll Screen.
Click Identity Certificate. The Manager displays the Administration | Certificate Management | Enroll
Step 3
| Identity Certificate screen. (See
Figure 12-24 Administration | Certificate Management | Enroll | Identity Certificate Screen
Notice that a link appears corresponding to each SCEP-enabled CA certificate on the VPN 3002. The
title of the link depends on the name of the CA certificate: Enroll via SCEP at Certificate Name. For
example, if you have a CA certificate on your VPN 3002 named "TestCA6-8," the following link
appears: Enroll via SCEP at TestCA6-8.
If you do not see any Enroll via SCEP options, there are no SCEP-enabled CA certificates on the VPN
3002. Follow the steps in the
a CA certificate via SCEP before you proceed.
Click Enroll via SCEP at Certificate Name. The Administration | Certificate Management | Enroll |
Step 4
Identity Certificate | SCEP screen appears. (See
VPN 3002 Hardware Client Reference
12-22
Figure
12-23.)
Figure
12-24.)
"Installing CA Certificates Automatically Using SCEP"
Figure
Chapter 12
Figure
12-19.)
12-25.)
Administration
section to obtain
OL-1893-01
Advertisement
Table of Contents
