Table of Contents
Advertisement
Chapter 13
Monitoring
Figure 13-4 Monitoring | Live Event Log Screen
Pause Display/Resume Display
To pause the display, click Pause Display. While paused, the screen does not display new events, the
button changes to Resume Display, and the timer counts down to 0 and stops. You can still scroll through
the event log. Click the button to resume the display of new events and restart the timer.
Clear Display
To clear the event display, click Clear Display. This action does not clear the event log, only the display
of events on this screen.
Restart
To clear the event display and reload the entire event log in the display, click Restart.
Timer
The timer counts 5 – 4 – 3 – 2 – 1 to show where it is in the 5-second refresh cycle. A momentary Rx
indicates receipt of new events. A steady 0 indicates the display has been paused.
OL-1893-01
Monitoring | Live Event Log
VPN 3002 Hardware Client Reference
13-7
Advertisement
Table of Contents
