Regulatory Notices - HP xw4300 Installation Manual

IDE Interface Information
ATA Standard
The primary and secondary IDE controllers built into the workstation conform to the ATA standards.
NOTE: The cable may not be identical to the cable in the following illustration. Device 0 and Device 1
connectors are reversed on some cables. Verify the connector functions in the documentation that came
with the workstation or device before connecting the IDE interface cable.

Regulatory Notices

This product has been tested and found to comply with the limits for a class B digital device of the FCC
Rules. Refer to the Safety and Regulatory Information guide on the documentation CD that came with your
workstation for additional regulatory information governing this product.
365578-001
Item
Device 0 connector (primary drive)
1
Device 1 connector (secondary drive)
2
System board connector
3
© 2004 Hewlett-Packard Development Company, L.P. The HP Invent logo is a registered
trademark of Hewlett-Packard Development Company, L.P. Microsoft and Windows are U.S.
registered trademarks of Microsoft Corporation. Linux is a U.S. registered trademark of Linus
Torvalds.
8
Function