Operating The Drive; Opening The Tray Manually - HP xw4300 Installation Manual

Operating the Drive

Identifying the Controls
Item
1
2
3
4
NOTE: The drive bezel and drive controls may not be identical to those shown.

Opening the Tray Manually

If you have exited the CD application and are unable to eject the disc with the load/unload button or if
right-clicking on the drive letter and selecting the eject function does not work, you can eject the disc
manually.
1. Insert a straightened paper clip or a metal rod approximately 1/16 inch (1.6 mm) in diameter and at
least 1 3/8 inches (34.9 mm) in length into the manual eject hole and push firmly until the tray
releases.
NOTE: The drive bezel and drive controls may not be identical to those shown.
2. Slowly pull the tray out from the drive until the tray is fully extended.
3. Remove the disc.
Components
Drive Activity Light
Manual Eject Button
Disc Tray
Load/Unload Button
Functions
Turns on when the optical drive is reading
information from the disc.
Opens the disc tray manually.
Holds the disc.
Opens and closes the disc tray.
7