Transport And Storage; Maintenance And Care - Kärcher K 2 Universal Edition Promo Manual

Table of Contents

Advertisement

Available languages

Available languages

Interrupting operation
 Illustration
Release the lever of the trigger gun and
lock it.
 During longer breaks (more than 5 min-
utes), also turn the appliance off using
the "0/OFF" switch.
Finish operation
CAUTION
Only separate the high-pressure hose from
the trigger gun or the device when there is
no pressure in the system.
 Release the lever of the trigger gun.
 Turn off the appliance "0/OFF".
 Disconnect the mains plug from the
socket.
 Turn off tap.
 Press the lever on the trigger gun to
release any remaining pressure in
the system.
 Lock the lever of the trigger gun.
 Detach the appliance from the water
supply.

Transport and storage

CAUTION
Risk of personal injury or damage!
Mind the weight and storage of the appli-
ance during transport.
When transporting by hand
 Lift appliance by the carrying handle
and carry it.
When transporting in vehicles
 Secure the appliance against shifting
and tipping over.
Storing the Appliance
 Park the machine on an even surface.
 Illustration
Stow the power cord and the remaining
accessories on the appliance.
Prior to extended storage periods, as dur-
ing the winter, also observe the instructions
in the Care section.
Frost protection
ATTENTION
Appliances and accessories that are not
completely drained can be destroyed by
frost. Completely drain appliance and ac-
cessories and protect them against frost.
To avoid damage:
 Completely drain all water from the ap-
pliance: Switch the appliance on with
detached high pressure hose and de-
tached water supply (max. 1 minute)
and wait, until no more water exits at the
high pressure connection. Turn off the
appliance.
 Store the appliance and the entire ac-
cessories in a frost free room.

Maintenance and care

The appliance is maintenance free.
DANGER
Risk of electric shock.
 Prior to all work on the appliance,
switch off the appliance and pull the
power plug.
Clean the sieve in the water connection
Clean the sieve in the water connection
regularly.
ATTENTION
The sieve must not be damaged.
 Remove coupling from the water con-
nection.
 Illustration
Pull the sieve out (e.g. using flat pliers),
clean under running water and then re-
insert it.
Care
English 15

Advertisement

Table of Contents
loading

Table of Contents