Hyundai H-HU4.3-U11E Instruction Manual page 20

INSTRUCTIONS FOR USAGE
Put the humidifier on a flat surface.
•
Remove the top cover, fill water into the water tank and then put back the top cover.
•
Alternatively, take out water tank for filling water, afterwards put the water tank back on the
main base.
• Check if the rated voltage meets the input voltage, and plug into the socket.
The LED display will flash once and a beep sound will be heard. The humidifier is in standby
•
state. "ON/OFF" button
Touch the "ON/OFF" button
•
light up and all buttons will be white. Indicator light will be on (with 7-color changing). Display
shows current humidity, current temperature and "AUTO" symbol
humidifier works under AUTO MODE.
Touch the "MIST OUTPUT" button
•
symbol will disappear.
Long touch "MIST OUTPUT" button
•
and show NIGHT MODE symbol
display will be off except NIGHT MODE symbol
waterless warning sound under this mode. Long touch the button again to exit NIGHT
MODE.
• Touch the "HUMIDITY" button
display will show symbol
The LED display will flash the expected humidity three times and then turn back to show the
•
current humidity. The humidifier enters into the constant humidity function, the expected
humidity is set.
Under constant humidity function, humidifier will adjust mist output level automatically.
•
When the expected humidity is 1%RH ~ 10%RH higher than current humidity, humidifier
•
works in level 1.
When the expected humidity is 10%RH ~ 15%RH higher than current humidity, humidifier
•
works in level 2.
When the expected humidity is 15%RH higher than current humidity, humidifier works in
•
mist output level 3.
When the expected humidity is less than the current humidity, the devise will be in sleeping
•
state. (Timer function is still working under this state.)
When the expected humidity is higher than the current humidity, the humidify function will
•
work again.
Touch the button till the LED display shows "Co", or long touch the button, it means to
•
cancel the humidity setting and back to AUTO MODE.
will be red.
on the control panel to switch on the humidifier, display will
to adjust the mist output, meanwhile "AUTO"
= level 1,
to entre NIGHT MODE. Display will become dim
, indicator light will be off. 10 seconds later, whole
to set your expected humidity from 30%RH to 75%RH,
. Touch once, it will increase by 5%RH.
20
= level 2, = level 3.
. There is no operative sound and
IM2021
. It means