HP xw4100 Hardware Installation page 3
Diskette drive installation hp xw series workstation
Hide thumbs
Also See for xw4100:
- Service and technical reference manual (194 pages) ,
- Getting started manual (62 pages) ,
- User manual (48 pages)
Advertisement
5. Route the diskette drive data cable between the system board and the hard drive cage. Your cable
might look different than the one shown.
CAUTION: The cable must stay between the system board and the hard drive cage. It might be
Ä
necessary to push the cable down so that it catches on the system board. This routing method is important
because you do not want to interfere with the heatsink fans or block airflow.
6. Replace the diskette drive bezel, front bezel, access panel, reconnect power, and turn on the
workstation.
3
Diskette Drive Installation
Advertisement
