Table of Contents
Advertisement
18. When the ENTER key is pressed, message screen is displayed
in the following. Set the zooming ring to the WIDE end (focal
length: 16 mm).
Zooming ring
19. When the ENTER key is pressed, message screen is displayed
in the following. Set the zooming ring to the TELE end (focal
length: 55 mm).
Zooming ring
20. When the zoom MR sensor adjustment is completed, automatic
adjustment of the focus mechanical end is started.
21. When automatic adjustment is completed, "PRESET ADJUST-
MENT OK" is displayed.
22. When the ENTER key is pressed, recording the adjustment data
and releasing from adjustment mode are performed automati-
cally, and "
[LENS PRESET ADJUST OK]" is displayed in
the message area when the process is completed.
(2) PRESET2 ADJ
• Perform focus actuator inspection.
Subject
Operation on Lens side
Shooting Mode of the camera P mode (Program Auto)
Adjusting Method
1. Click the [PRESET2 ADJ] button in the Adjustment and Inspec-
tion.
2. Automatically starts the focus actuator inspection.
3. When focus actuator inspection is completed, "PRESET2 AD-
JUSTMENT OK" is displayed.
4. When the ENTER key is pressed, recording the adjustment data
and releasing from adjustment mode are performed automatically,
and "
[LENS PRESET2 ADJUST OK]" is displayed in the
message area when the process is completed.
5-40
SEL1655G
Not required
Not required
SYS SET
Advertisement
Table of Contents
