Removing The Power Supply - HP Visualize b132L Upgrade Instructions

Transfer the Power Supply from the Old Main Tray to the New Main Tray
Transfer the Power Supply from the Old Main Tray to
the New Main Tray
To remove the power supply from the old tray, perform the following:
1 Remove the two power supply retaining screws, as shown in Figure 15.
Figure 13

Removing the Power Supply

2 Pull the power supply out of the side of the main tray, as shown in Figure 15.
CAUTION: To avoid damage, be sure to use two hands to remove the power supply and
pull it straight out.
3 To install the power supply into the new tray, slide the power supply into the chas-
20
Power Supply Retaining Screws
sis and tighten the two power supply retaining screws.