Installation - Electrolux COE7P31X2 User Manual

36 www.electrolux.com
Problem
The display shows "F102". • You did not fully close
The display shows an error
code that is not in this ta‐
ble.
The appliance is activated
and does not heat up. The
fan does not operate. The
display shows "Demo".
13.2 Service data
If you cannot find a solution to the
problem yourself, contact your dealer or
an Authorised Service Centre.
The necessary data for the service
centre is on the rating plate. The rating
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)

14. INSTALLATION

WARNING!
Refer to Safety chapters.
Possible cause
the door.
• The door lock is defec‐
tive.
There is an electrical fault.
The demo mode is activa‐
ted.
plate is on the front frame of the oven
cavity. Do not remove the rating plate
from the oven cavity.
.........................................
.........................................
.........................................
Remedy
• Fully close the door.
• Deactivate the oven
with the house fuse or
the safety switch in the
fuse box and activate it
again.
• If the display shows
"F102" again, contact
the Customer Care De‐
partment.
• Deactivate the oven
with the house fuse or
the safety switch in the
fuse box and activate it
again.
• If the display shows the
error code again, con‐
tact the Customer Care
Department.
Refer to "Using the set‐
tings menu" in "Additional
functions" chapter.