Samsung VS20R90 Series User Manual page 32

Problems
Cleaning is finished but
small dust particles come
out of the brush.
Vacuum cleaner stops
operation during cleaning.
Static electricity occurs
when cleaning a thick and
soft mat.
1_VS9000_EN_00821R-00_AP_A5.indd 31
• After cleaning, operate the vacuum for 10 seconds or more to
suction up the small dust particles.
• As this product has the overheating prevention device of the
motor, product will stop operation temporarily for the following
conditions.
– When the vacuum operates with a full dustbin.
– When the vacuum operates with suction part or brush
clogged.
– When the Extension Crevice Tool is used for long hours.
• After correcting the cause of the problem, turn the product
on again. (This case may differ depending on the ambient
temperature.)
• Materials of a mat (childcare center mat, noise prevention mat
for between floors, etc.) may cause the static electricity.
– Move the brush on a normal floor for a while and clean again,
then the static electricity should disappear.
Solutions
English 31
2020-05-25 오후 3:05:00