Network Board - HP Vectra XA5 Supplementary Manual

Connector
10 BT Remote power-on (RPO) and
Remote wake-up (RWU)
10 Mbits per second operation
100 BT Remote wake-up (RWU)
100 Mbits per second operation
HP Vectra XA 5/xxx PC

Network Board

Network Board
The Ethernet 10/100 BT PCI board is a proprietary PCI network board, with
two network connectors.
Remote start
Properties
If the user complains of poor network performance, check whether the 100
BaseT connector is being used on a 10 BaseT network. (Doing so causes the
100 BaseT connector to switch automatically to a back-up 10 BaseT mode of
operation, but with many retries and the consequent poor performance.)
10
Configuration needs
Must have cable plugged between the remote start connector on
the network board and the external start connector on the system
board.
Power-on integrated network field set to Enabled.
No requirements
Suspend wake-up.
Power-on integrated network field set to Enabled.
External cable not needed
No requirements
10 BaseT RJ-45 UTP connector
100 BaseT RJ-45 UTP connector