Replacing the System Board
1.
2.
3.
Turn the PC off. Set SW10 of the
system board switches to
Turn the PC on. Wait until the
POST displays this message:
Turn the PC off. Set SW10 of the
system board switches to
Turn the PC on. Wait until the
POST stops at the 85% stage.
Select
Vectra X series
from the menu.
Follow the instructions that are
displayed on the screen.
4.
Flash the System ROM with the latest version of the System BIOS
Remove the old system board
Install the new system board
.
closed
Product Flag cleared,
set switch to the
open position before
rebooting
.
open
0041-49 Invalid
internal product type,
correct with F2.
HP Vectra XA 5/xxx PC
Replacing the System Board
Update the product
identification field
5