Agilent Technologies 1200 Infinity Series Manual page 3

Features
Feature summary:
• Analog input for data collection from any type of 3rd-party detector such as
evaporative light scattering, laser-induced fluorescence, refractive index or
radioactivity detectors
• Analog-to-digital conversion of analog input for full data analysis through
Agilent chromatography data system, or for peak-based fraction collection
triggered by baseline threshold or peak slope (peak width > 0.2 seconds)
• Analog output to feed pump pressure traces or detector signals from Agilent
LC modules to third-party data systems
• General purpose input/output interface (GPIO/ERI) for digital mass-based
fraction triggering and general purpose use
• Low voltage output of 5 V and/or 24 V
• Four timetable programmable relay contacts for control of external devices
through close/open commands
• External leak sensor with separate input line for improved lab safety
• CAN connection to 1200 Series LC or 1200 Infinity Series LC modules
3