Agilent Technologies 1200 Infinity Series Manual page 20

Representation in the Driver Software
The representation of the UIB II in the dashboard of the Rapid Control LC
Driver provides information on the following items:
• Connectors
Analog In
•
Analog Out
•
• Relay contacts
• Voltage out information (if used)
Figure 16 Dashboard tile of the G1390B driver
Table 4 Function of items in UIB II graphic
Item Function
Shows the source of the Analog Out signal (upper) or Test Signal
(lower)
Shows the current states of the four external contacts
Shows which Voltage Out voltages are currently enabled.
20