Configuring The Scsi Bus; Using Scsi Select - HP Vectra VL5 5 Supplementary Manual

ATTENTION

Configuring the SCSI Bus

You can configure your PC's SCSI bus using the SCSISelect utility. This
utility is for use with Internal Wide 16-bit SCSI devices.

Using SCSI Select

™
The SCSISelect utility is intended for advanced users only.
Note that the SCSISelect option displayed on your screen may
be different to the one described here.
The SCSISelect utility is accessed by pressing
computer's start-up process when the message
SCSISelect(TM) Utility!
The Options menu is displayed.
Would you like to configure the host adapter, or run the
SCSI disk utilities? Select the option and press <Enter>.
Press <F5> to switch between color and monochrome modes.
Configure/View Host Adapter Settings
Arrow keys to move cursor, <Enter> to select option, <Esc> to exit
Use the and
the SCSISelect utility. Press
menu.
is displayed.
SCSISelect(TM) Utility v1.xxx
Options
SCSI Disk Utilities
keys and the
at any time to return to the previous
Configuring the SCSI Bus
during the
<Ctrl><A>
Press <Ctrl><A> for
key to make selections in
English
1