Using Setup To Configure The Pc - HP Vectra VL5 4 Supplementary Manual

3 Troubleshooting and Repair

Using SETUP to Configure the PC

Using SETUP to Configure the PC
Setup Item
Main
System time
System date
System memory
Extended memory
Running Windows 95
Preferences
User Password is
Set User Password
Key Click
Key auto-repeat speed
Delay before auto-repeat
Numlock at POWER-ON
42
Default Action
Allows you to set the system time and date. Select the
field you want to change with Tab, Shift Tab, or Enter.
640KB Allows you to view the system memory and extended
15MB* memory. * Value is typical value, real value depends on
your configuration.
No Allows you to indicate if Windows 95 is running/installed.
If you are NOT running Windows 95, the BIOS Setup
program will offer you some of the Windows 95 features
and optimize hardware resources, such as initializing all
Plug and Play devices.
Disabled Indicates if a user password has been set.
Allows you to set a password to prevent unauthorized
access to your PC. You cannot set a user password if an
administrator password HAS NOT been set.Setting a user
password prevents unauthorized use of your computer,
protects the data stored in it, and preserves the
preferences you set.
On Allows you to turn the audible keyclick on or off.
21.8 per Second Allows you to set the number of times per second a
keystroke will be repeated when a key is held down.
This option is not displayed if you are running Windows
95.
.50 Second Allows you to specify the length of the delay before a
character is repeated when a character is held down. If
you generally press keys slowly and heavily, set the delay
to a higher number to make your keyboard less sensitive
and to avoid characters being displayed more than once.
On This field allows you to specify whether the number keys
of the numeric keypad are enabled when your computer
starts. Otherwise, the keypad keys act as cursor control
keys.