Replacing The System Board; Hp Vectra Diagnostic Utility - HP Vectra VL5 4 Supplementary Manual

3 Troubleshooting and Repair

Replacing the System Board

Replacing the System Board
When replacing the system board, the PC's serial number must be recorded
in the new system board ROM. This is done using the PHLASH utility,
provided on diskette with the replacement system board.
To record the serial number, type the command:
PHLASH /ds:"xxxxxx" /mode=1
where is the serial number of the PC. (The serial number is found
xxxxxx
on the back of the PC's box.)

HP Vectra Diagnostic Utility

No diagnostic utility was available for the Vectra VL 5/xx series 4 PC at the
time of printing. A diagnostic utility for this PC range will be available in
early 1996 in the HP BBS Library.
51